|
|
Refinished Desk
Before.... In the flow tank, getting stripped
Click for a larger picture
After stripping, the desk was sanded and We then stained, applied sealer, glazed
prepped for finishing and lacquered with several finish coats.
Marble Top Repair
Above: This Victorian Marble top was part of a set. To begin the repair, it's very important the marble is
on a perfectly flat surface. I use a larger piece of scrap marble for this. The top is then glued up using a
West System epoxy and allowed to cure for 2 days.
Above: After the epoxy cured, the top was flipped over and a channel was routed. An Iron bar was epoxied
In place to add extra support.
Above: Next, the crack is filled with custom colored filler, then sanded and polished when dry.
Above: The finished Job
Page
More updates coming soon!! Let us know if there is anything in particular you would like to see on this page.